Danish Energy Agreement for 2012-2020

Source: IEA/IRENA Renewables Policies Database
Last updated: 5 November 2017
The Agreement establishes a framework for the policy on climate and energy up to 2020 and outlines the direction Denmark will take until 2050.
According to the Agreement in 2020 half of the electricity consumption will come from wind power, enabling a share of 35% renewable energy in gross energy consumption in 2020. Moreover, the energy consumption is to decrease by more than 12 % in 2020 compared to 2006.
The initiatives in the Agreement will lead to CO2 emissions in 2020 being 34% lower than they were in 1990. At the same time, the Agreement is to ensure a stable framework for the business community as a whole, and the energy sector in particular.
Renewable energy in power generation
The Agreement secures substantial expansion of wind power, corresponding to the annual consumption of 1 ½ million households. Thus in 2020, wind power will account for approximately 50% of Danish electricity consumption. The Agreement implies that:
600 MW offshore wind turbines will be built at Kriegers Flak and 400 MW offshore wind turbines will be built at Horns Rev before 2020;
a further 500 MW offshore wind turbines will be installed near the coast before 2020;
new planning tools will encourage development of onshore wind turbines with a total capacity of 1,800 MW up until 2020;
over a period of four years, a total of DKK 100 million will be committed to funding development and use of new renewable energy technologies for electricity production (solar, waves ,etc.) as well as DKK 25 million for wave power demonstration facilities.
Energy-efficiency measures
With the Agreement initiatives, in 2020 Denmark will have reduced its final energy consumption (excluding consumption for transport) by almost 8% compared to 2010. The Agreement contains the following elements:
energy companies must realise specific energy savings exceeding today requirements, e.g. by consulting energy experts and by offering subsidies to e.g. households and businesses;
energy companies must increase efforts by 75% from 2013 to 2014, and by 100% from 2015 to 2020 compared to 2010-12;
a comprehensive strategy for energy renovation of all Danish buildings will be developed.
Green heating measures:
converting from coal to biomass at large-scale power plants will be made more attractive by amending the Heating Supply Act;
the smaller open-field plants that are struggling in the wake of high heating prices will be allowed to produce cheap heating based on biomass;
DKK 35 million will be committed to promoting new renewable technologies, e.g. geothermal energy and large heat pumps.
Renewable energy in buildings
The Agreement supports the phasing-out of oil-fired boilers in existing buildings by:
banning installation of oil-fired boilers and natural gas boilers in new buildings from 2013;
banning installation of new oil-fired boilers in existing buildings in areas where district heating or natural gas is available from 2016;
committing DKK 42 million in 2012-15 to fund the conversion from oil-fired boilers and natural gas boilers in existing buildings to renewable energy.
Renewable energy in industry
Industry must also convert to a greener energy system. Therefore the Agreement lays down that:
- a subsidy should be given to help promote investment in energy efficient use of renewable energy in the production processes of enterprises. In the period 2014 to 2020, the subsidy will be increased to DKK 500 million a year from DKK 250 million in 2013:
- funding of DKK 30 million per year from 2013 to 2020 will be introduced to maintain and promote industrial CHP in industries and greenhouses.
Deployment of Smart Grids
Large electricity consumption in combination with wind power requires an intelligent energy system. Therefore the Agreement lays down that:
a comprehensive strategy for establishing smart grids in Denmark is to be drawn up;
an agreement with grid companies on roll-out of remotely readable hourl

Want to know more about this policy ? Learn moreLearn more

End uses covered
  • Building end-uses